COLLECTION MOBILE ENGLISH CHINA
THE CURRENT POSITION:HOMEMEMBRANE PRODUCTS > Membrane bioreactor and membrane modules
External detachable hanging membrane bioreactor (MBR) and detachable type PVDF membrane module

[ External detachable hanging membrane bioreactor (MBR) introduction]

External detachable hanging membrane bioreactor (MBR) technology is using the PVDF membrane to replace the secondary sedimentation tank of conventional activated sludge method.,by the pump to directly put the sludge-water mixed liquid in the biochemical pool into the membrane tube,and membrane filtration under pressure, the water through the membrane into the water tank, and the sludge and concentrated liquid back to the biochemical pool to continue to participate in biochemical reaction.

The difference between external detachable hanging membrane module and traditional external MBR membrane module :

Not only the automation control pump, operation, backwashing, chemical cleaning, etc.but also the online chemical cleaning is very convenient.

PVDF membrane module is detachable, cleaning is very simple and convenient, solve the problem that the traditional external type MBR membrane module after running for a period of time was blocked by the sludge,and the flux cannot recover after chemical cleaning.

PVDF is hanging type(At the bottom of the membrane module is not fixed), membrane silks in stainless steel shell with water and air flow freely float,and the sludge cannot be attached to the PVDF membrane at run time.

The bottom of the membrane module is hanging membrane silks,and the water recoil and gas scrubbing sewage outlets are also at the bottom of membrane shell,making the chemical cleaning frequently become very simple, just point button into the chemical cleaning, and the chemical cleaning agent in cleaning without emissions, cleaning times up to 5 times.


[ External detachable hanging membrane bioreactor (MBR) introduction]

Not easy to be blocked, easy cleaning,Process Object:Various of biochemical wastewater, oily wastewater, high sludge wastewater,etc.

Name

Model

Filter fineness

Design fluxm3/D

Operation mode

Material

Sizemm

External dimension

loose joint

External detachable hanging membrane module

KJ-WMBR-14-PVDF

0.1μm

5.5

Detachable hanging type

PVDF

ф170X1100

DN40

COUPLING

Note:Inlet Water pressure:0.01~0.08Mpa; Backwashing pressure :0.03~0.08Mpa


Note:Inlet Water pressure:0.01~0.08Mpa; Backwashing pressure :0.03~0.08Mpa

Detachable hanging type membrane module


170T/D detachable hanging type membrane system